Brief Introduction:
Pre-warm mode, Manual mode and Baby mode;
Set temperature and skin temperature can be displayed separately;
Main body is made of Stainless steel;
Double sides phototherapy radiant box;
Acrylic glass bassinet;
APGAR timer;
Timer to count phototherapy time;
Failure alarm indication;
RS232 connector.
Standard configuration
It is mainly composed of the warmer module, controller, bassinet, phototherapy, and the stand and so on.
Specification
Power requirement: AC220V-230V/50Hz or AC110-120V/50-60Hz, 850VA
Mode of control: Pre-warm mode, manual mode and baby mode are controlled by micro-computer
Baby mode temperature control range: 34.5-37.5°C
Skin temperature display range: 5°C -65°C
Accuracy of skin temperature sensor: ±0.2°C
Temperature uniformity of mattress≤2°C
Dominant wavelength of blue light: 400-550nm
Timing range of blue light: 0-9999hrs 59min
APGAR timer: audible and visible alarm when the device runs to 50" - 1', 4' 50" - 5', 9' 50" - 10' ;
Failure alarm: over temperature alarm, deviation alarm, sensor failure alarm, power failure alarm, setting alarm, checking alarm and so on.
Average value of general bilirubin radiation on the mattress effective range:
≥250uW/cm2 ( the above phototherapy equipment)
≥600uW/cm2(the nether phototherapy equipment)
Environmental temperature
Operating range: 18ºC-30ºC
Ambient air movement rate: ≤0.3m/s
Package
Package: each unit is packed to one carton
Size(Main body ): 94cm×57cm×108cm
Gross Weight:57kg
Details:
Company Information:
